PC tip changer PCA-21

Cap tip automatic changer apparatus

ATC  ” PC tip changer “

The original cap tip detaching method is possible for the reliable changing of cap tip and shank without any damage.
The upper and lower simultaneous changing method can be induced drastic time saving.
It is applicable to a wide range of welding process.
It is possible in changing of upper and lower cap tips simultaneously or independently corresponding to the specification of a gun type.

Standard outside dimension 564.5(D)×395(W)×820~982(H) mm
Weight 33kg
Control power source DC24V
Changer unit Usage fluid Compressed air (0.4~0.7MPa)
Pawl’s opening strength 1,000kgf (at the 0.4MPa)
Minimum opening space of a pawl 4.0mm
Pawl’s max opening width 9.6mm
Floating function Standard loading (up and down/right and left 2mm)
Setting abnormal sensor Standard loading
Magazine unit Tips holding pcs up and down each 16 pieces
Floating function Standard loading (up and down/right and left 2mm , back and forth 8mm)
Sensor for non tips check Standard loading
Tip installation recognition sensor Standard loading
Installation basement Standard loading
Tip retrieve water tank Standard loading
Corresponding model Welding gun (Drive) Air gun, servo gun
Welding gun (Type) C type gun, X type gun, Stationary welding machine
Applicable cap tip/shank etc. Tip diameter/Overall length φ13x 20L
φ16x23L・25L etc
Tip shape

A type, R type, E type, P type, F type etc

Tip New tip, Recycled tip
Shank shape Straight, triangular holder, arm etc.

 

 ※ Change an outside dimension by a model.

pctc01

 

【この記事を印刷する - Print this content】