DRAGON
Characteristic
This is a type of one piece or two pcs of nuts respectively are cut out and feeding to a head by air using mechanical escap (Air cylinder).
Specification
| Outside dimension (mm) | 450(D)×380(W)×1200(H) mm |
|---|---|
| Hopper volume | 12ℓ or 8ℓ ※ |
| Power source | AC100V(50／60Hz) |
| Air pressure | 0.4 ～1.0MPa |
| Nut size | M4 ～M12 |
| Nut shape | Square, With collar,Round, Hexagonal, T type, etc. |
| Supply capacity | Sq. nut about 70 pcs/minute, round nut about 30 pcs/minute |
| Control box | Applied exclusive circuit board |
| Feeding hose | 3m (standard) |
※ The volume is changed by the nut size
