Nozzle

New product

M Nozzle, MN-S73G, Zinc-plating spatter countermeasure dedicated nozzle

Spatter peeling off with zinc-plating steel easy!

MN-D73G F Company Customer Evaluation (Reference Example)

Surface Treatment	Life Time Performance	Cost Comparison	Spatter Peelability
Plating Nozzle	1.0	1.0	×
Magby Treatment	1.5	2.1	△
M Nozzle pX	2.5	2.7	〇
M Nozzle GX	4.5	2.7	◎

Details of MN-S73G

M Nozzle　NEW

M Nozzle

Characteristic

・Compatibility nozzle with conventional type in a revolutionary spatter adhesion prevention coating

・200A　350A　500A　600A Available in each current range
・Conventional Nozzle→Spatter （About 1000℃）adheres to the nozzle, operate mechanical peeling (Damaged with scratches）
・M Nozzle→Spatter adheres to the nozzle, easy peeling off with cloth etc. (Less scratches)

SKK Nozzle　NEW

Characteristic

・Standard compatibility Nozzle of low cost, uniform beautiful plating quality.

・Φ21 is recommended for robot operation

RED.71 Nozzle

Characteristic

Due to thin thickness of Tip portion, the spatter adhered area is reduced and the spatter is hard to adhere and also easy removal even if adhered.

Specification

Nozzle Holder (Aluminum Duracon Made)

	Characteristic ・It is installed O Ring o the place of nozzle holding with threads. Therefore, it is easy to put on and take off of our nozzle. ・As the Aluminum made nozzle holder is applied nozzle of teflon tube and Duracon made nozzle holder is applied nozzle of copper pipe, the prevention of electric short-circuit of the torch and mother material side is made. Accordingly,the spark of the nozzle is prevented.
Specification

Teflon Pipe Nozzle

Characteristic

・Hard to adhesion of the spatter.

・Together us with Specialized Aluminum Adapter.

・Cutting is made free, according to the necessary length.

・Soft material is strong for the interference with work.

Spacification

Red Nozzle（Cu Pipe）

Characteristic

Due to Small Diameter, it is suitable for a difficulty of an interference with Jig.

Spacification

Saiminasu Nozzle

	Characteristic For Large Current of more than 300A. Main Body is applied ceramics (Saiminasu). Realization of low cost form the separate type instead of the all-in-one type. ※ From the specific character of the product, the usage of nozzle cleaner is prohibited.