Bolt automatic feeder equipment ( F type bolt feeder )
F type bolt feeder
Characteristic
Welding action using spot welding upper cylinder and insert bolt simultaneously.
Insert bolt accurately with the guidance of a guide pin and chock.
The structure of a guide pin is extended from lower electrode (always a guide pin is ascending position.). It is easy for the decision of bolt position.
Detection of bolt’s presence or not by the downward length of a guide pin.
Spec
| Outside demension | 580(D)×430(W)×1200(H) mm |
|---|---|
| Hopper volume | 12ℓ |
| Power source | AC100V |
| Air pressure | 0.4〜0.5MPa |
| Nut size | M4〜M10 |
| Nut shape | Collar Round (Below Projection) |
| Supply capacity | About 15 pcs / Minute |
| Feeding hose | For manual ( Welding machine Independently )： 3 m (standard) For Robot ( Equipment installation) ：－ |
